home Grind-Scrape   Surface Prep

An industry first! • Without removing the carbide chips from the plate,
diamond grinding plugs or diamond grinding discs can be added to
the 15" plate to change from scraping to grinding in seconds
• Two types of diamond choices available

Grind & Scrape™ Plate
  
Item # Description
  • A new and exciting surface preparation system that quickly and easily converts from carbide scraping to diamond grinding in seconds
  • The Grind & Scrape™ is available in 11" and 15" plates which will work on any buffer that accommodates the correct size plate
  • The “lock point” allows the plate to be locked to the machine
  • An Adapt-A-Clutch is recommended to protect the buffer
  
#7262
15" Grind & Scrape™ Plate
Includes six Carbide Holders with Chips
#7262-1
15" Grind & Scrape™ Plate
Includes six Carbide Holders with Chips, and three Grinding Discs
#7263
11" Grind & Scrape™ Plate
Includes six Carbide Holders with Chips
 
7262
Diam_discs
Diam_plugs
plate
    
15" plate shown with Diamond
Grinding Discs
15" plate shown with Diamond
Grinding Plug
#7263 11" plate
 
#7266 Diamond Grinding Disc
  
Item # Description
  • Eliminates swirl marks
  • Unique planetary diamond grinding disc rotates on heavy duty sealed bearings which allows the disc to rotate in the opposite direction of the plate eliminating “swirl marks” in concrete surfaces
  • Presents the same result as a planetary grinder which would cost thousands of dollars more
  • Gives the surface of the floor a fantastic finish for sealing, painting or staining
  
#7266-A
Diamond Grinding Disc Assembly
#7266-C
Grinding Disc Only, Coarse
#7266-1
Grinding Disc Bearing
#7266-2
Grinding Disc Mounting Post
#7266-3
Mounting Post Retainer Clip
#7266-4
Grinding Disc Mounting Bolt
#7266-5
Grinding Disc Mounting Washer
 
7266-A
7266-C
7266-2
7266-4
7266-5
   4266-3      
#7266-C
#7266-C
#7266-C

#7266-C

  
#7266-C
      
#7265 Diamond Grinding Plug
  
Item # Description
 
7265
  • Diamond grinding plugs for aggressive grinding
  • Evens out, smoothes or decontaminates concrete surfaces
  
#7265-C
Diamond Grinding Plug, Coarse, 36 Grit
#7265-F
Diamond Grinding Plug, Fine, 200 Grit
#7265-M
Diamond Grinding Plug, Medium, 80 Git
 
#7267 Three Position Carbide Holder
  
Item # Description
   
  • This unique three position carbide mount allows operator to set carbides to optimum performance
  • Can be used for scraping all types of adhesives, removing thinset mortar, epoxy, urethane, thin coatings, elastomerics, paint, etc.
  • Large 1", eight sided carbide grinding chip
 
#7267
Three Position Carbide Holder
#7267-1
Carbide Holder Mounting Bolt
#7268
Eight Sided Carbide Replacement Chip
#7268-1
Carbide Chip Fastening Screw
  7267
7267-angle
7267-straight     7267-chip    
Chip set:
angle, straight for
aggressive scraping
Chip set:
flat, straight
    
Chip set:
flat, point forward
      
#7260 Adapt -A- Clutch
         
A safety clutch must be used on all non-belt driven machines
  
  • Safely prevents coupler breakage and
    buffer damage
  • Disengages if the plate hits an obstruction
  • Improves operator safety
  • For use with all Grind & Scrape™ Plates and Away™ Discs
   safety cluch safety cluch1  
7260