Hexplates® |
|
|
|
|
-
Interchangeable Hexpins® attach to Hexplates® for grinding, sanding, polishing and coating removal
-
Unique spring-base allows Hexpin® attachments to float easily over rough surfaces and uneven floors
-
Patented fluted design helps maintain dust control
-
15" plate mounts onto most 17" & 18" floor buffers
-
11" plate mounts onto most buffers designed for an 11" plate Hexplates® can be ordered with or without a safety clutch
-
Pins not included
|
|
#6000 |
15" Hexplate® Only |
#6000-33 |
15" Hexplate® with a Safety Clutch |
#6010 |
11" Hexplate® Only |
#6010-33 |
11" Hexplate® with a Safety Clutch |
|
|
#6000
|
Safety Clutch |
|
|
|
|
|
|
-
Safely prevents coupler breakage and buffer damage
-
Disengages if the Hexplate® hits an obstruction
-
Can be ordered with Hexplate® Systems
-
Cannot be purchased separately
|
 |
#6020 Hexpin® and Chip Aggressive Cut |
|
|
|
#6010 |
- Hexpin® and Chip with an aggressive cut
- Removes thin paint and epoxy from concrete, dry or gummy adhesive, but works well for other concrete surface removal applications
- Can be used in combination with our other Carbide Hexpins
- Use equal number of Aggressive Hexpins® and Carbide Hexpins®
- These Hexpins® are so aggressive, it is recommended that they are only used on belt driven machines or with the Safety Clutch on non-belt driven machines
- Twelve required per 15" Hexplate®, ten required per 11" Hexplate®
|
|
#6020 |
Aggressive Hexpin® with Chip Only |
#6020-2 |
Aggressive Chip Only |
#6020-3 |
Aggressive Hexpin® Repl. Screw |
#6020-11 |
11" Hexplate® complete with Aggressive Hexpins® with Chips |
#6020-1133 |
11" Hexplate® complete with Aggressive Hexpins® with Chips & Safety Clutch |
#6020-15 |
15" Hexplate® complete with Aggressive Hexpins® with Chips
|
#6020-1533 |
15" Hexplate® complete with Aggressive Hexpinsr with Chips & Safety Clutch |
|
|
#6020-11
|
|
|
|
|
|
|
| |
|
#76020 |
#76020-2 |
|
|
#6003 Hexpin® and Chip Regular Cut |
|
|
|
#6003-11 |
- Removes thinset and coatings from concrete
- Twelve required per 15" Hexplate®, ten required per 11" Hexplate
|
|
#6003 |
Carbide Hexpin® Assembly |
#6003-2 |
Replacement Carbide Chip Only |
#6003-11 |
11" Hexplate® complete with Carbide Hexpins® |
#6003-1133 |
11" Hexplate® complete with Carbide Hexpins® & Safety Clutch |
#6003-15 |
15" Hexplate® complete with Carbide Hexpins® |
#6003-1533 |
15" Hexplate® complete with Carbide Hexpins® & Safety Clutch |
|
|
| |
|
|
|
|
|
| |
|
#6003 |
#6003-2 |
|
|
|
#6025 Hexpin® Diamond Pads |
|
|
|
|
-
Fast, aggressive grinding • Wide diamond segments allow longer life
-
Smoothes rough surfaces
-
Prepares concrete surfaces for coatings
-
Provides texture to slippery surfaces
-
Removes sealers and bond breaker coatings
-
Grinds close to wall
-
Spring loaded to follow concrete surface
-
Large grinding surface
-
Easily removes trowel marks
-
Four segments per pad • Easy pad change
-
Pad includes nuts and washers
-
Six required per 15" Hexplate®, five required for 11" Hexplate®
|
|
#6025-1 |
Hexpin® Diamond Pad Assembly Only for 11" Hexplate® |
#6025-2 |
Hexpin® Diamond Pad Assembly Only for 15" Hexplate® |
#6025-3 |
Diamond Pad only for 11" Hexplate® |
#6025-4 |
Diamond Pad only for 15" Hexplate® |
#6025-11 |
11" Hexplate® complete with Hexpin® Diamond Pads |
#6025-1133 |
11" Hexplate® complete with Hexpin® Diamond Pads & Safety Clutch |
#6025-15 |
15" Hexplate® complete with Hexpin® Diamond Pads |
#6025-1533 |
15" Hexplate® complete with Hexpin® Diamond Pads & Safety Clutch |
|
|
#6025-11 |
|
|
 |
|
|
|
| |
|
|
|
|
|
|
|
|
Diamond Hexpin® System |
|
|
|
#6001-1
|
-
Designed for grinding and sanding of concrete surfaces
-
Twelve required per 15" Hexplate®, ten required per 11" Hexplate®
|
|
#6001-1 |
Blue Diamond Hexpin® Only |
|
Hard bonded for more abrasive surfaces |
#6001-2 |
Green Diamond Hexpin® Only |
|
General purpose sanding |
#6001-3 |
Gold Diamond Hexpin® Only |
|
Coarse for more aggressive grinding |
|
|
| |
|
|
|
|
| |
|
#600-1, #600-2, #600-3 |
|
|
