Stripper Model |
|||||||||
| Stock # | Description | Thickness |
Application Removal on Wood or Concrete Floors Unless Specified |
#550, #505 & #500 Panther |
#5300 Panther Porta |
#5280 & #6280 Panther® Self-Propelled |
#6280-HD Panther® |
#5110, #5200-QL & #5700 Ride-On |
|
| Increased Angle Blades | |||||||||
 |
#7080 | 3" x 8" | 0.062 |
Mainly used for VCT, but can be used on most other applications. Supplies more of an angle when angle is needed. Prevents machine from jumping off material | x |
x |
x |
x |
|
| #7081 | 3" x 10" | 0.062 |
x |
x |
x |
x |
|||
| Straight Shank Blades | |||||||||
 |
#7070-2 | 2" x 4" | 0.5 |
Works well for ceramic, wood and thick epoxy. The ultimate for the toughest removals. Made from an ultra tough alloy, which is put through special processing to give these blades unbelievable edge holding ability for ceramic epoxy, thin-set, mud set, decorative concrete toppings and much more | x |
||||
| #7070-3 | 3" x 4" | 0.5 |
x |
||||||
| #7070-4 | 4" x 4" | 0.5 |
x |
||||||
| #7070-6 | 6" x 4" | 0.5 |
x |
||||||
Angle Shank/Shoe Blades Patent 7,082,686 & 6,813,834
|
|||||||||
 |
#7071-2 | 2" x 4" | 0.5 |
Works well for ceramic and thick epoxy. The same application as the #7070 blades, but is mounted at an angle to achieve the optimum shear point for optimum performance | x |
||||
| #7071-3 | 3" x 4" | 0.5 |
x |
||||||
| #7071-4 | 4" x 4" | 0.5 |
x |
||||||
| #7071-6 | 6" x 4" | 0.5 |
x |
||||||
| Straight Shank with Carbide Tip | |||||||||
 |
#7072-2 | 2" x 4" | 0.5 |
Works well for ceramic and thick epoxy. The same application as the #7070 blades, but are carbide tipped for holding a sharp edge for long periods. Nothing else performs like carbide when no other blade will work. Works well on elastomeric coatings | x |
||||
| #7072-3 | 3" x 4" | 0.5 |
x |
||||||
| #7072-4 | 4" x 4" | 0.5 |
x |
||||||
| #7072-6 | 6" x 4" | 0.5 |
x |
||||||
| Angle Shank/Shoe Blade with Carbide Tip Patent 7,082,686 & 6,813,834 | |||||||||
|
#552 | 2-1/2" x 4" | 0.5 |
Works well for ceramic, wood and thick epoxy.Requires #551 shank holder | For #550 only |
||||
| Razor/Scraper Blades (Pkg of 50) | |||||||||
 |
#363-2 | 3/4" x 8" | 0.032 |
Razor sharp, super hard for scraping thin epoxies, thin mil coatings like urethane paint, poured elastomeric coatings up to 60 mil, hard to remove adhesive and much more . #5280 & #6280 requires Swivel Head Attachment. #6280-HD, #5110, #5200, #5200-QL & #5700 requires Razor Blade Heads | x |
x |
|||
| #368-8 | 7/8" x 8" | 0.045 |
x |
x |
|||||
| #368-12 | 7/8" x 12" | 0.045 |
x |
x |
x |
||||
| #368-15 | 7/8" x 15" | 0.045 |
x |
x |
|||||
| Tapered Cutting Head Shanks Patent 7,082,686 & 6,813,834 | |||||||||
 |
#7075-8 | 2" x 8" | 0.3 |
The long taper works great on tough wood floors (glued & nailed). The long length allows the blade to easily slide under tough material. Works well on most ceramics and VCT | x |
||||
| #7075-11 | 2" x 11" | 0.3 |
x |
||||||
| #7077-8 | 3.5" x 8" | 0.3 |
x |
||||||
| #7077-11 | 3.5" x 11" | 0.3 |
x |
||||||
| Tapered Cutting Head Shanks with Carbide Tip Patent 7,082,686 & 6,813,834 | |||||||||
|
#7076-8 | 2" x 8" | 0.3 |
The long taper works great on tough wood floors (glued & nailed). The long length allows the blade to easily slide under tough material. Works well on most ceramics and VCT. Carbide tipped for holding a sharp edge for long periods | x |
||||
| #7076-11 | 2" x 11" | 0.3 |
x |
||||||
| #7078-8 | 3.5" x 8" | 0.3 |
x |
||||||
| #7078-11 | 3.5" x 11" | 0.3 |
x |
||||||
| Ultra Heavy Duty Ceramic Epoxy Angle Shanks with Carbide Tip Patent 7,082,686 & 6,813,834 | |||||||||
 |
#7079-2 | 2" x 6" | 0.5 |
Designed for ceramic removal and thin-set rescraping. 1/2" of carbide. The extra carbide allows for maximum resharpening. Strong enough to work on machines up to 3500 lbs. | x |
||||
| #7079-4 | 4" x 6" | 0.5 |
x |
||||||
| #7079-6 | 6" x 6" | 0.5 |
x |
||||||
| 6280-HD Angle Shank Blade with Carbide Tip Patent 7,082,686 & 6,813,834 | |||||||||
 |
#7281-1 | 1" x 6" | 0.5 |
Works well for ceramic, wood, rescrape, thin-set and epoxies. The carbide allows for maximum resharpening. | x |
||||
| #7281-2 | 2" x 6" | 0.5 |
x |
||||||
| #7281-4 | 4" x 6" | 0.5 |
x |
||||||
| #7281-6 | 6" x 6" | 0.5 |
x |
||||||