It has been six week since I took delivery of my 5700 All Day Battery Machine. In that short time, we have run the machine just about every available workday. We have removed double stick carpet, ceramic tile, glued down hardwood, VCT and thin coatings. I can’t express enough, what a pleasure it is to have a machine that works as hard as we do. My crews and I have been running the 5200-QL model for 3 to 4 years. National has hit a home-run with the introduction of the All Day Battery machine. We find no performance degradation at the end of an eight hour work day (5-6 hours of machine time). In fact, we ran it two days in a row without recharge just to see what the lower end of the charge spectrum would be like. I guess we’ll have to try three days next time. The machine is just as powerful in hour eight to ten as one to three, unbelievable! I could not be happier. Can’t wait to see what those National boys have up their sleeve next!

David Salmon
I've worked for Floorz for 14 years.  The first 11 of those I spent as a professional carpet installer.  I enjoyed my work with carpet and had a good start on a career. A few years ago I started having some pretty serious problems with my back, and had to leave the installation field and started sales for the same company.  It was a pretty big shock to think that I couldn't do the work I enjoyed anymore and after moving into sales I found myself missing the experience of working with my hands.  There is a satisfaction in making something with your hands that was missing in my current line of work.

A while ago, our company stumbled upon an old double pull Binding Brute. She was a little time worn, and not very pretty, but we thought with the recession, we might find a way to bring a new dynamic to what we do here at Floorz.  Due to my experience with carpet I was a natural with the binder and with the manual and DVD, it was fast and easy to learn. Within a few days I was making my very first rugs.  I now handle all the binding for our store. My brute has a special place here at Floorz. The machine, even after all these years runs like a top. The hardest part of making rugs for my customer is cutting them. Once I put the Brute on them its over. This machine eats carpet and spits out dollar bills! I would probably be in worse shape if it weren’t for National Equipment. Hundreds of miles away you guys are as friendly and eager to help as if you were right here in Tennessee. It’s always a pleasure to call and place an order. The associates are helpful and polite, and the products I have ordered are top notch in quality and consistency.

When our old girl wears out, it will be another Brute from National that handles our binding here at Floorz. Thanks for all the help, and I look forward to doing more business with you.

Dan Trotter

Floorz

I just wanted to let you know how great we thought your rug making course was.  Everyone who attended felt that actually being taught “hands on” by an experienced instructor allowed us to learn a lot in a short time.  You did a great job of teaching us how to use the various tools and equipment as well as how to work with the different materials. We could never learn as much by just reading a manual or book. The class far exceeded our expectations and I would highly recommend it to anyone wanting to learn rug making.

Thanks Again,
Nick 

In a pool area at a community center, our job was to remove the ceramic tile and thinset off the existing substrate. We found it to be installed with a dry packed concrete between one to two inches thick which was to enable water to flow towards the drains. Utilizing the National 7600 Ride-On Floor Removal Machine, what would have taken us over four weeks to finish, we were able to accomplish in less than two weeks. This machine is unbelievable.


Mark Southerland
Valley Lake Flooring 
 
 
 
 
 
 
 
 
 
Had a very productive day today - used the National Grinder w/ Diamond Plugs to prep the shop floor at about 300 sq ft/hr!  This machine has been a workhorse for us and was a great purchase.  Last week we used our PCD's and ripped up left over mastic glue from a tile removal like butter and the proverbial hot knife.  We are very happy with this purchase!
 
Ed - Epoxy Floors

 
 


We would like the opportunity to thank National for making such a fine machine in the 6280-HD floor scraper.  We have used competitors scrapers in the past and have found the 6280-HD far superior.  In both customer satisfaction and lack of service problems, you machine is a clear winner in our rental market!
 
Gene
AAA Rent-All, Inc.