Scarifier cutters and washers
Steel cutters, or "TSR" cutters, are known for their versatility; they are designed to take up everything from thin mil coatings and glues to mastics, line striping, and rust off steel decks, as well as do general concrete preparation. They leave a shot-blast like profile.
Milling cutters, or "TMO" cutters, are designed to remove thicker, softer materials while doing minimal damage to the underlying surface. These cutters efficiently remove epoxy coatings, thermoplastics, line striping, waterproofing membranes, and general scarifying applications. TMO cutters are made of tungsten and are best applied when the underlying surface needs a very light profile.
Tungsten carbide-ttipped cutters, or "HMR" cutters, are the workhorses of the cutter world. Commonly used for leveling high spots on concrete or asphalt, grooving concrete, tough line removal applications, sidewalk trip hazards, and stubborn thin-set removal, these cutters are most common on jobsites requiring a tough removal. HMR cutters will leave a rough profile on concrete, and will last longer than standard steel cutters.
Cutters, HMR-5.40 (set)
Washers, HMR-5.40 (set)
Cutters, TMO-7.15 (set)
Washers, TMO-7.15 (set)
Cutters, TSR-5.5 (set)
Cutters, TSR-7.5 (set)
Washers, TSR-5.5 and TSR-7.5 (set)